Model KZL32 Pneumatic Bundling
Tensioner and Model KZS32 Pneumatic Bundling sealer are novel bundling
tools which have high level of mechanization. Two tools should be united
that all actions(Tensioning, sealing, breaking) can be finished.
These tools are pneumatic bundling
tools,which have many characteristics such as lightweight, simple
operation, safety and can be suitable for bundling steel, tube and
plate.
Note:You need have
a pump(This item need 0.4~0.6MPa)
Model:KZL32
Air Pressure:0.4~0.6MPa
Weight of tool:less than 5kg
No-load speed of strap:more than
5m/min
Tension:8.5KN
Steel strap type:32*(0.8~1.2)mm
1.There should be 0.8m3/min air flow
and a 0.4 to 0.6Mpa compressed air source in the workshop;
2.The average air consumption during
bundling is 1m3;
3.The compressed air should go into
the tool through the filter,the regulator and the lubricator(Called
three-union in short) respec-tively;
4.Branch lines are taken from the top
of main,the air hose is 14mm.
Item
Included(251032):
1*Pneumatic Bundling Tensiner
1*Pneumatic Bundling sealer
烟台速麦国际贸易有限公司 版权所有 All Rights Reserved @2019-2024
公司地址:山东省烟台市高新区经三路 36 号联东 U 谷 17号楼 101 号（A55 号楼）
联系电话:0535-3941008 传真:0535-3941008 E-mail:service@intsupermai.com
设为首页 | 
加入收藏 | 
联系我们 
